IPX Commands
config ipxroute delete
config ipxroute delete [<dest_netid> | default] <next_hop_netid>
<next_hop_node_addr>
Description
Removes a static IPX route entry from the route table.
Syntax Description
dest_netid
next_hop_id
next_hop_node_addr
Default
N/A.
Usage Guidelines
If you have defined default or static routes, those routes will remain in the configuration independent
of whether the VLAN or VLAN IP address that used them remains. You should manually delete the
routes if no VLAN IP address is capable of using them.
Example
The following command deletes a static IPX route entry to the IPX route table:
config ipxroute delete default 0011 00:eb:2a:0b:1e:0a
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
1194
Specifies the destination NetID.
Specifies the NetID of the neighbor IPX network.
Specifies the node address of the next IPX router.
ExtremeWare Software 7.0.0 Command Reference Guide