Create Multilink - Extreme Networks ExtremeWare Command Reference Manual

T1, E1, and T3 WAN Commands

create multilink

create multilink <groupname>
Description
.
Creates an MLPPP multilink group
Syntax Description
groupname Specifies the multilink group name
Default
N/A.
Usage Guidelines
Use this command to create a multilink group. Like the command, the
create vlan multilink
keyword must be used when creating the multilink group. Once the group is created, ExtremeWare
recognizes the group name as a multilink group, so the keyword is not needed in other
multilink
commands that manipulate multilink groups.
Example
The following command creates the multilink group ml_remote:
create multilink ml_remote
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
1344 ExtremeWare Software 7.0.0 Command Reference Guide