Config Vlan Add Track-Iproute - Extreme Networks ExtremeWare Command Reference Manual

ESRP Commands

config vlan add track-iproute

config vlan <vlan name> add track-iproute <ipaddress>/<masklength>
Description
Configures an ESRP-enabled VLAN or a VRRP VLAN to track a route entry in the kernel route table.
Syntax Description
vlan name
ipaddress
Default
No route tracking.
Usage Guidelines
If the specified routes are not reachable, the device automatically relinquishes master status and remains
in standby mode (for ESRP) or backup mode (for VRRP).
This command can be used with both ESRP-enabled VLANs and VRRP VLANs.
Example
The following command enables IP route failure tracking for routes to the specified subnet:
config vlan esrp-1 add track-iproute 192.168.46.0/24
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on the "i" series platforms.
744
Specifies an ESRP-enabled or VRRP VLAN name.
Specifies the IP address of the route entry to be tracked.
ExtremeWare Software 7.0.0 Command Reference Guide