IP Multicast Commands
unconfig pim
unconfig pim {vlan <vlan name>}
Description
Resets all PIM settings on one or all VLANs to their default values.
Syntax Description
vlan name
Specifies a VLAN name.
Default
If no VLAN is specified, the configuration is reset for all PIM interfaces.
Usage Guidelines
None.
Example
The following command resets all PIM settings on the VLAN accounting:
unconfig pim vlan accounting
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
1182
ExtremeWare Software 7.0.0 Command Reference Guide