Create Aps - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

PoS Commands

create aps

create aps <group#>

Creates an APS group with the specified group number.

Syntax Description

Specifies the APS group# to which the command applies.

Usage Guidelines

You specify the

parameter, which is an integer in the range [1-65535]. The

identify the APS group. An APS group includes one working line and one protection line. The working

line and protection line can reside on the same BlackDiamond switch or two different BlackDiamond

switches. The group numbers must be unique across all BlackDiamond switches that are cooperating to

provide the APS function. The group numbers must also be used in a consistent manner across

BlackDiamond switches. For example, if the working line is assigned to

1 on BlackDiamond #1,

and the associated protection line resides on BlackDiamond #2, then the protection line must also be

assigned to group #1 on BlackDiamond #2. The

is used to identify the partner (in other words,

working or protection) line in Ethernet messages exchanged by BlackDiamond switches that are

cooperating to provide the APS function.

The following command example creates APS group 1001 on the BlackDiamond switch:

create aps 1001

This command was first available in an ExtremeWare IP Technology Services Release based on

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0