Config Route-Map Set Accounting-Index 1 Value - Extreme Networks ExtremeWare Command Reference Manual

ARM Commands

config route-map set accounting-index 1 value

config route-map <route-map> <sequence_number> [add | delete] set
accounting-index 1 value <bin_number>
Description
Configures the accounting bin number to be associated with the specified route map entry.
Syntax Description
route-map
sequence number
add
delete
bin_number
Default
N/A.
Usage Guidelines
• The accounting-index value is always set to 1 for destination-sensitive accounting.
• The parameter identifies a particular route map.
route-map
• The
sequence_number
must be associated with a match statement.
• The
set accounting-index 1 value
accounting bin number.
• The parameter is an integer between 0—7, and allows you to define the accounting bin
bin_number
number.
Table 25: Set Operation Keywords
Command
accounting-index <index> value
<value>
Example
The following command configures the accounting bin number to be associated with the specified route
map entry:
config route-map rt40 11 add set accounting-index 1 value 5
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
1230
Specifies a route map.
Specifies a specific entry in the route map.
Specifies to add the statement to the route map.
Specifies to delete the statement from the route map.
Specifies an accounting bin number.
parameter identifies a specific entry in that route map. The sequence number
keyword phrase indicates that the following parameter is an
Description of Change
Sets the accounting bin number for the route-mapped accounting index. The
accounting index value is always set to 1 for destination-sensitive accounting.
ExtremeWare Software 7.0.0 Command Reference Guide