BGP Commands
config bgp peer-group no-dampening
config bgp peer-group <name> no-dampening
Description
Configures no route flap dampening for a BGP peer group (disables route flap dampening).
Syntax Description
name
Specifies a BGP peer group.
Default
This feature is disabled by default.
Usage Guidelines
Use the following command to enable route flap dampening for a BGP peer-group:
{{<half-life> {<reuse> <suppress>
config bgp peer-group <name> dampening
<max-suppress> }} | {route-map <route map>}}
Example
The following command disables route flap dampening to the BGP peer group external:
config bgp peer-group no-dampening
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all "i" series platforms.
1076
ExtremeWare Software 7.0.0 Command Reference Guide