Displaying Ospf Settings; Ospf Lsdb Display; Authentication - Extreme Networks ExtremeWare 7.2e Installation And User Manual

configure vlan HQ_10_0_1 ipaddress 10.0.1.2 255.255.255.0
configure vlan HQ_10_0_2 ipaddress 10.0.2.2 255.255.255.0
enable ipforwarding
configure ospf add vlan all area 0.0.0.0
enable ospf

Displaying OSPF Settings

There are a number of commands you can use to display settings for OSPF. To show global OSPF
information, use the
To display information about one or all OSPF areas, use the following command:
show ospf area <area identifier>
The option displays information about all OSPF areas in a detail format.
detail
To display information about OSPF interfaces for an area, a VLAN, or for all interfaces, use the
following command:
show ospf interfaces {vlan <vlan name> | area <area identifier>}
The option displays information about all OSPF interfaces in a detail format.
detail

OSPF LSDB Display

ExtremeWare provides several filtering criteria for the
multiple search criteria and only results matching all of the criteria are displayed. This allows you to
control the displayed entries in large routing tables.
To display the current link-state database, use the following command:
show ospf lsdb area [all | <area identifier>[/<len>] | detail | interface | lsid
<id>[/<len>] | lstype [all | as-external | external-type7 | network | opaque-area |
opaque-global | opaque-local | router | summary-asb |summary-net| routerid
<id>[/<len>] | stats | summary | vlan <vlan name>]
The option displays all fields of matching LSAs in a multi-line format. The
detail
displays several important fields of matching LSAs, one line per LSA. The
number of matching LSAs, but not any of their contents. If not specified, the default is to display in the
summary format.
A common use of this command is to omit all optional parameters, resulting in the following shortened
form:
show ospf lsdb
The shortened form displays all areas and all types in a summary format.

Authentication

Authentication is supported at two different levels: interface, and domain or area.
ExtremeWare 7.2e Installation and User Guide
command with no options.
show ospf
command. You can specify
show ospf lsdb
stats
Displaying OSPF Settings
option
summary
option displays the
245