Validation For Files Uploaded From Switch To Usb Flash Drive; Downloading And Uploading Of Files; Commands In This Chapter; Unmount Usb - Dell Networking 7048 Reference Manual

Validation for Files Uploaded from Switch to USB
Flash Drive
• Memory insufficient -Validation to check memory availability on the USB
flash drive to upload the file from switch.
• File downloaded from USB flash drive need not be copied to RAM to
perform validations. Instead, the file can be directly read from USB flash
device and copied to buffers in chunks to perform the necessary
validations.Validation does not require RAM Download feature to be
supported by switch.

Downloading and Uploading of Files

After the file validations are successful, switch proceeds with downloading of
files from the USB flash device to the switch and uploading of files from the
switch to the USB flash drive. The status of file download / upload is shown
on the console. Detailed messages are logged in the system log for further
reference.

Commands in this Chapter

This chapter explains the following commands:

unmount usb

show usb
unmount usb
Use the unmount usb command in Privileged EXEC mode to make the USB
flash device inactive.
Syntax
unmount usb
Parameter Description
This command does not require a parameter description.
1726
USB Flash Drive Commands
dir usb