About Santap; Default Settings - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring SANTap
The Storage Services Module (SSM) supports SANTap in Cisco MDS SAN-OS Release 2.0(2b) and
later.
This chapter includes the following sections:
•
•
•
•
•

About SANTap

The SANTap feature allows third-party data storage applications, such as long distance replication and
continuous backup, to be integrated into the SAN. The protocol-based interface that is offered by
SANTap allows easy and rapid integration of the data storage service application because it delivers a
loose connection between the application and an SSM, which reduces the effort needed to integrate
applications with the core services being offered by the SSM. See
OL-16184-01, Cisco MDS SAN-OS Release 3.x
About SANTap, page 49-1
Configuring SANTap, page 49-4
Displaying SANTap Information, page 49-5
Removing Appliance-Generated Entities, page 49-8
Default Settings, page 49-9
49
C H A P T E R
Figure 49-1.
Cisco MDS 9000 Family CLI Configuration Guide
49-1