Vlan Participation All; Vlan Port Acceptframe All - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static

6.1.9 vlan participation all

This command configures the degree of participation for all interfaces in a VLAN. The ID
is a valid VLAN identification number
Format
Mode
Participation options are:
include
exclude
auto

6.1.10 vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces. The modes defined as
follows:
• VLAN Only mode - Untagged frames or priority frames received on this interface are
discarded.
• Admit All mode - Untagged frames or priority frames received on this interface are
accepted and assigned the value of the interface VLAN ID for this port.
With either option, VLAN tagged frames are forwarded in accordance with the IEEE
802.1Q VLAN Specification.
Default
Format
Mode
6.1.10.1 no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit
All mode, untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
VLAN Commands
.
vlan participation all {exclude | include | auto}
<1-4094>
Global Config
The interface is always a member of this VLAN. This is
equivalent to registration fixed.
The interface is never a member of this VLAN. This is equiv-
alent to registration forbidden.
The interface is dynamically registered in this VLAN by
GVRP. The interface will not participate in this VLAN unless
a join request is received on this interface. This is equivalent
to registration normal.
all
vlan port acceptframe all {vlanonly | all}
Global Config
v1.0, November 2007
6-5