Radius-Server Timeout; Retransmit; Show Radius-Servers; Show Radius-Servers Statistics - Dell PowerConnect 6224 Command Line Interface Manual

Command

radius-server timeout

retransmit

show radius-servers

show radius-servers
statistics

source-ip

timeout

usage

NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Spanning Tree
Command
clear spanning-tree
detected-protocols

exit (mst)

instance (mst)

name (mst)

revision (mst)

show spanning-tree

show spanning-tree
summary
spanning tree
spanning-tree auto-portfast Sets the port to auto portfast mode.
82
Command Groups
Description
Sets the interval for which a switch waits for a
server host to reply
Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
Displays the RADIUS server settings.
Shows the statistics for an authentication or
accounting server.
Specifies the source IP address to be used for
communication with RADIUS servers.
Sets the timeout value in seconds for the
designated radius server.
Specifies the usage type of the server.
Description
Restarts the protocol migration process on all
interfaces or on the specified interface.
Exits the MST configuration mode and applies
configuration changes.
Maps VLANs to an MST instance.
Defines the MST configuration name.
Defines the configuration revision number.
Displays spanning tree configuration.
Displays spanning tree settings and parameters
for the switch.
Enables spanning-tree functionality.
Mode*
GC
R
PE
PE
R
R
R
Mode*
PE
MC
MC
MC
MC
PE
PE
GC
IC