Broadband; Wireless; Routing - ZyXEL Communications NBG7510 User Manual

Figure 18 Navigation Panel
Table 6 Navigation Panel Summary
LINK TAB
Connection Status
Network Setting

Broadband

Broadband

Wireless

General
Guest/More AP
MAC
Authentication
WPS
WMM
Others
Channel Status
Home LAN Setup
Networking
Static DHCP
UPnP
Additional
Subnet
Wake on LAN
TFTP Server Name

Routing

Static Route
DNS Route
Chapter 3 Web Configurator
FUNCTION
Use this screen to configure basic Internet access, wireless settings, and
parental control settings. This screen also shows the network status of the
Zyxel Device and computers/devices connected to it.
Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new
WAN connections.
Use this screen to configure the wireless LAN settings and WLAN
authentication or security settings.
Use this screen to configure multiple BSSs on the Zyxel Device.
Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.
Use this screen to configure and view your WPS (WiFi Protected Setup)
settings.
Use this screen to enable or disable WiFi MultiMedia (WMM).
Use this screen to configure advanced wireless settings.
Use this screen to scan wireless LAN channel noises and view the results.
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Use this screen to assign specific IP addresses to individual MAC
addresses.
Use this screen to turn UPnP and UPnP NAT-T on or off.
Use this screen to configure IP alias and public static IP.
Use this screen to remotely turn on a device on the local network.
Use DHCP option 66 to identify a TFTP server name.
Use this screen to view and set up static routes on the Zyxel Device.
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS servers.
NBG7510 User's Guide
29