Wireless Frame Capture - ZyXEL Communications NXC2500 User Manual

31.6 Wireless Frame Capture

Use this screen to capture wireless network traffic going through the AP interfaces connected to
your NXC. Studying these frame captures may help you identify network problems.
Click Maintenance > Diagnostics > Wireless Frame Capture to display this screen.
Note: New capture files overwrite existing files of the same name. Change the File Prefix
field's setting to avoid this.
Figure 219 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 190 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL
MON Mode APs
Configure AP to
MON Mode
Available MON
Mode APs
Capture MON Mode
APs
Misc Setting
Chapter 31 Diagnostics
DESCRIPTION
Click this to go the Configuration > Wireless > AP Management screen, where
you can set one or more APs to monitor mode.
This column displays which APs on your wireless network are currently configured
for monitor mode.
Use the arrow buttons to move APs off this list and onto the Captured MON Mode
APs list.
This column displays the monitor-mode configured APs selected to for wireless
frame capture.
NXC Series User's Guide
364