578 / CSU stats
Checking bipolar violations
Start with Active alarms.
1. Press ' until you find Bipolar violatn.
2. Press ≠. The display shows the number of
bipolar violations that occurred in the last minute.
Checking short term alarms
Start with Active alarms.
1. Press ' until you find ShortTerm alarms.
2. Press ≠.
The display shows the first type of shortterm alarm and the
number of milliseconds, not necessarily contiguous, it was
active in the last minute.
3. Press ' and " to move through the
short term alarms.
Checking defects
Start with Active alarms.
1. Press ' until you find Defects.
2. Press ≠.
The display shows the first type of defect and the number
of milliseconds, not necessarily contiguous, the hardware
reported it active in the last minute.
3. Press ' and " to move through the
defects.
Modular ICS 7.1 Installer Guide
N0130943 02