Set Lock; Allow Last No; Allow Saved No; Allow Link - Nortel ICS Install Manual

Set lock

You can adjust the amount of personal programming and
customizing that can be performed at a telephone.
Press CHANGE to select a set lock level of: None, Partial, or
Full.

Allow last no

A telephone can be prevented from using Last Number Redial
(≤fi).
Press CHANGE to select the setting: Y (Yes) or N (No).

Allow saved no

A telephone can be prevented from using Saved Number
Redial (≤fl‡).
Press CHANGE to select the setting: Y (Yes) or N (No).

Allow link

A telephone can be prevented from using Link (≤‡⁄),
an option that allows a caller to connect to an outside PBX.
Press CHANGE to select the setting: Y (Yes) or N (No).
For more information about host system signaling, refer to the
Modular ICS 7.1 System Coordinator Guide.
N0130943 02
Terminals&Sets / 355
Modular ICS 7.1 Installer Guide