174 / Private networking using PRI SL-1
9. Press ≠. The prompt displays Caller ID Set.
10. Press ' until the prompt displays Extl VMsg
set.
11. Press CHANGE to select Y (yes).
Set Telco features for the target line
1. Press – until you reach the top level, then press
' until the prompt displays Lines.
2. Press ≠. The prompt displays: Show line:
3. Enter the target line number for the voice mail system.
4. Press ≠. The prompt displays: Trunk/line
data:
5. Press ' until the prompt displays Telco
features.
6. Press ≠. The prompt displays VMsg Center 1.
7. Press ≠. The prompt displays Use:.
8. Press CHANGE to until you reach Routing tbl.
9. Press '. The prompt displays Tel #:.
10. Enter the number to access the external Auto Attendant
system.
11. Exit programming.
Modular ICS 7.1 Installer Guide
N0130943 02