Remote Access; Rem Access Pkgs; Rem Line Access - Nortel ICS Install Manual

Remote access

Remote access packages allow you to control the remote use
of Norstar line pools. Create a remote access package by
defining which of your system line pools will be accessible.
You then assign the package to individual lines (using Rem
line access), and to a particular Class of Service password
(Remote pkg in COS passwords).

Rem access pkgs

Use ≠ and the dialpad to select the remote access
package you want to program.
LinePool access
Press CHANGE to select the line pool access setting for each
pool: N (No) or Y (Yes).
Remote page
Press CHANGE to select the remote paging setting for each pool:
N (No) or Y (Yes).

Rem line access

Enter the number of the line which will be accessible by
remote users.
L001 Rem pkg
Press CHANGE and enter the number of the remote access
package remote users accessing the line will be able to use.
Refer to the table below for a list of default settings.
N0130943 02
System prgrming / 463
Modular ICS 7.1 Installer Guide