Common Settings; Control Sets - Nortel ICS Install Manual

382 / Services

Common settings

Services share the settings for control telephones, schedule
names, and schedule times.

Control sets

A control telephone turns Services on and off for the lines and/
or telephones assigned to it. You can assign several control
telephones for your system.
A control telephone for lines controls Ringing service,
Restriction service and Routing service for its assigned lines.
A control telephone for telephones controls Restriction service
and Routing service for its assigned telephones. Assign a
control telephone for each external line and telephone.
Use ≠, ', CHANGE and the dialpad to
program the internal number of the control telephone for each
line and each telephone.
Control set configurations for both lines and telephones can be
copied from one set/line to another set/line or to a range of
sets/lines, or to all sets/lines, using the COPY softkey.
Tips -
with a control telephone to use the three kinds of Services. You
can assign a control telephone to more than one external line
or telephone, but a line or telephone cannot be assigned to
more than one control telephone.
One recommendation is to have one control telephone for all
lines and a different control telephone for all telephones.
Modular ICS 7.1 Installer Guide
External lines and telephones must be programmed
N0130943 02