On Hold; Receiver Volume; Camp Timeout - Nortel ICS Install Manual

On hold

On hold allows you to choose what a caller hears on an
external line when the line has been put on hold.
Press CHANGE to select the setting: Tones, Music, or Silence.
Tones provides a periodic tone.
•
Music provides any signal from a source such as a radio
•
connected to the ICS.
Silence provides no audio feedback.
•

Receiver volume

Receiver volume allows you to specify whether the volume
level of a handset receiver or headset will return to the system
default level when a call is ended or put on hold, or whether
the volume will remain at the level set at the individual
telephone.
Use ≠ and CHANGE to select either: Use sys volume
or Use set volume.
This feature is not available on some older telephones.

Camp timeout

Camp timeout delay allows you to assign the number of
seconds before an unanswered camped call is returned to the
telephone which camped the call.
Press CHANGE to select the setting: 30, 45, 60, 90, 120, 150,
or 180 seconds.
N0130943 02
System prgrming / 431
Modular ICS 7.1 Installer Guide