Program Onn Blocking Bri Loop State - Nortel ICS Install Manual
Nortel norstar ics software: install guide
Hide thumbs
Also See for ICS:
- Quick start manual (36 pages) ,
- Supplementary manual (6 pages) ,
- User manual (138 pages)
Table of Contents
Advertisement
492 / Telco features
Program ONN blocking BRI loop state
The display shows the loops found on the BRI card.
1. Press ' to display the settings for individual
loops on a BRI card.
2. At the Loops display, press next to display the first loop
number.
3. Press ≠. Type:T displays.
4. Press ' until ONNblk:SuprsBit displays.
5. Press CHANGE to toggle the BRI loop state setting from
SuperBit to SrvcCode.
6. Repeat these steps to program ONN blocking BRI loop
state for other loops, as required.
ONN call blocking notes:
•
Set, line and set/line restrictions have no effect on digits
programmed within the ONN feature code.
•
Call back from the CO is disallowed with this feature.
Modular ICS 7.1 Installer Guide
N0130943 02
Advertisement
Table of Contents
Troubleshooting
