Nortel ICS Install Manual page 352

352 / Terminals&Sets
Note: Default filters are only loaded at a cold start.
Filters 02, 03, and 04, although not preset with restrictions and
overrides, are used as default filters in these programming
headings:
Filter
02
03
04
Tips -
Norstar can have up to 100 restriction filters (00 to 99).
Each programmable filter can have up to 48 restrictions. There
is no limit on the number of overrides that can be allocated to
a restriction.
There is a maximum of 400 restrictions and overrides
allocated to the 100 programmable filters.
The maximum length of a restriction is 15 digits. The maximum
length of an override is 16 digits.
A single dot (•) in a dialing sequence is a wild card (stands for
any digit). It is inserted by pressing ANY.
Modular ICS 7.1 Installer Guide
Heading
Terminals&Sets
Lines
Lines
Filter 00 cannot be changed.
Sub-heading
Set restrns:
Line restrn:
Remote restrn:
N0130943 02