Set Relocation - Nortel ICS Install Manual

440 / System prgrming
The default setting is 221.
Refer to Alarm codes on page 548 for details about reading
alarms and troubleshooting with alarms.

Set relocation

Set relocation allows you to move any telephone to a new
location within the Norstar system without losing the directory
number, autodial settings, personal speed dial codes, and any
programming for that telephone.
Press CHANGE to select the setting: N (No) and Y (Yes).
Tips -
telephone installation and programming is complete. This
provides you with more flexibility in testing equipment.
Modular ICS 7.1 Installer Guide
It is advisable to activate Set relocation after the
Warning
If this feature is deactivated while a telephone is
moved, the internal number and programming
data for that telephone remain with the physical
port on the ICS, and the telephone does not
receive the original programming when it is
reconnected elsewhere.
If you plug a new telephone into the original
location before you reinstall the moved
telephone, the programming moves to the new
telephone and the moved telephone must be
reprogrammed.
N0130943 02