Figure 9.21 Tcp / Ip Switch Link Diagnostics; Checking A Switch Link; Step 9-20: Checking A Tcp / Ip Link - Nortel CC MIS User Manual

CC MIS
9-36
TCP / IP Switch Link Diagnostics
The Switch Link Diagnostics screen shows the status of the selected
link. (Links are selected from the Options menu using the Options
key.)

Figure 9.21 TCP / IP Switch Link Diagnostics

Checking a switch link

The TCP/IP Switch Link Diagnostics command allows you to see if
the link is operational. The system sends a call packet across the spec-
ified link and reports any problems that occur. The system displays
any error messages.
Perform the steps below to check a switch link.

Step 9-20: Checking a TCP / IP link

1. Access the Diagnostics screen.
2. Enter s to select TCP/IP Switch Link Diagnostics.
The Link Diagnostics screen is displayed.
3. Select the link to be checked by entering the link number
Release 5.2
297-2671-545