Nortel ICS Install Manual page 443

Appearance (SWCA) buttons and how Hold will handle these
calls.
Tips -
that you have Park turned on for your system by specifying a
Park prefix (Access codes), and a park timeout setting
(System programming, Featr settings).
Describing SWCA control functions
The Auto Associate settings determine if answered calls will
automatically be associated to SWCA buttons, and for what
duration.
• Manual on park: The user must press a SWCA button or
enter a SWCA code to park a call on a SWCA code. When
the call is retrieved, the SWCA code is available to another
call.
• Manual LOC: The user must press a SWCA button or enter
a SWCA code to park a call on a SWCA code. When the
call is retrieved, the SWCA code is still assigned to the
call, and remains assigned to the call until the call is
terminated.
• Automatic LOC: The call is automatically associated with
an available SWCA button/code. The user must still press
the SWCA button or enter the SWCA code to park the call.
The call remains assigned to that code until the call is
terminated.
Auto ASSC I/C (Y, N): If set to Yes, calls that arrive assigned
to the intercom button are automatically associated with a
SWCA code. If the user presses ≤•fi¤‚ (park on
next free SWCA code), the call parks on the assigned code.
The Invoke by Hold setting determines if a SWCA call put on
Hold can be picked up from other extensions in the group.
N0130943 02
Since SWCA buttons use the Park feature, ensure
System prgrming / 443
Modular ICS 7.1 Installer Guide