Connecting Expansion Modules; Order Of Connection; Analog Station Module - Nortel ICS Install Manual

242 / Inserting a cartridge
Receive and transmit jumper loop connections
Loop
1
2
3
4

Connecting expansion modules

If your system includes fiber Trunk Modules, fiber Station
Modules, Data Modules or Analog Station Modules, you need
to connect the modules to the Expansion Cartridge by means
of fiber cables.

Order of connection

In order to keep the default port and telephone numbering:
• Connect Trunk Modules to the Expansion Cartridge
beginning at the top and working down.
• Connect Station Modules to the Expansion Cartridge
beginning at the bottom and working up.

Analog Station Module

If you are installing the ICS system with an ASM, refer to the
diagram below.
Connect jack 1 on the ASM to the first available fibre cable
link on the CCU.
Modular ICS 7.1 Installer Guide
RX and TX shorting straps
J3 and J4
J7 and J8
J1 and J2
J5 and J6
N0130943 02