Dn Lengths (Enbloc Dialing) - Nortel ICS Install Manual
Nortel norstar ics software: install guide
Hide thumbs
Also See for ICS:
- Quick start manual (36 pages) ,
- Supplementary manual (6 pages) ,
- User manual (138 pages)
Table of Contents
Advertisement
452 / System prgrming
DN lengths (enbloc dialing)
The Private DN Length must be set to the number of digits
users dial to reach other nodes in a private network. The
Private DN Length parameter is used by the PRI trunk to
determine when a complete number has been dialed. The
PSTN DN Length Table is used by the PRI trunk to determine
when a complete PSTN DN has been dialed. Entries in the DN
Length table consist of two fields: Prefix and DN Length.
TIP -
are using the coordinated dialing plan (CDP), as the system
identifier is part of the set DN.
Defining dialing plans:
At System prgrming/Dialing plan:
1. Press ≠. Private Network:None displays.
2. If you are defining a dialing table for a private network,
press ≠. Refer to Private networks on page 453.
If you are defining a dialing table for external (public) DNs
for a network, press '. Refer to Public networks
on page 454.
Modular ICS 7.1 Installer Guide
You do not need to use a Private DN Length if you
N0130943 02
Advertisement
Table of Contents
Troubleshooting
