Malicious Caller Identification (Mcid) - Nortel ICS Install Manual

190 / ETSI, MCDN and Network features
If the alerting extension is not the CLID extension for that line,
the line appearance can be pressed to briefly display the
information. Pressing ≤°⁄⁄ or INFO while the call is
active invokes Call Info. Call Info on MCDN SL-1 displays
the redirecting number and the reason for the redirection.
Note: When Norstar requests that an incoming call be
redirected by the distance network, Norstar does not
inform the network of the redirecting DN. In this case,
the diverted-to party will not see the diverting party
DN.

Malicious caller identification (MCID)

The MCID feature allows you to use ≤°·‡ to have
call information recorded on the central office system for an
incoming call on a specific line (EURO ISDN lines, only).
The user must invoke the feature code without hanging up, and
within 30 seconds (time varies on different networks) after the
caller hangs up.
Note: This feature must be supplied by your service provided
and allowed in network programming to work. Check
with your system administrator.
The following information registers on the network:
• called party number
• calling party number
• local time and date of the invocation in the network serving
the called user
• service provider option: calling party subaddress, if
provided by calling user)
Modular ICS 7.1 Installer Guide N0130943 02