Park Prefix - Nortel ICS Install Manual

458 / System prgrming

Park prefix

The Park prefix is the first digit of the call park retrieval code
that must be entered to retrieve a parked call. If the Park prefix
is set to None, calls cannot be parked.
Press CHANGE to select the setting: 1 to 9, None, or 0.
Tips -
If DN length is changed, and the changed DNs conflict with
the Park prefix, the setting changes to None.
Tips -
numbers appear on the display during programming.
Although the numbers 0 to 9 are valid Park prefix settings,
some may have been already assigned elsewhere by default or
by programming changes. To avoid a conflict, refer to the
table of default settings in the description of External code.
SWCA note: If you want to use system wide access (SWCA)
keys on your system, you must specify a valid Park Prefix to
turn on the feature.
Modular ICS 7.1 Installer Guide
The Park prefix cannot be the same as:
• the Direct-dial digit
• the External Line access code
• the first digit of a DN
• the first digit of a line pool access code
• the first digit of a destination code
Other programmable settings may affect which
Installer password required
N0130943 02
-