Programming
The installer or the customer service representative programs
settings for the entire Norstar system, plus settings for
individual telephones and external lines.
Most of the settings can also be programmed by a system
coordinator who has a SysCoord+ password. The SysCoord+
password should only be used by individuals who are capable
of programming the Norstar ICS. Further, this level of access
should only be distributed to System Coordinators who are
more experienced in programming the Norstar ICS.
Programming affects system operation.
Only a qualified installer or customer service
representative should perform startup, installation and
maintenance programming. Some of the settings affect
the correct operation of the system.
N0130943 02
Modular ICS 7.1 Installer Guide