Rec'd # Length; Dn Length - Nortel ICS Install Manual

Rec'd # length

The Received number length setting allows you to change the
number of digits received on auto-answer trunks. These digits
are used to identify target lines, Auto DNs, and DISA DNs.
Press CHANGE to select the setting: 1, 2, 3, 4, 5, 6, or 7. Then,
press ' to make the change.
Tips -
the Received number for the target line (for example,
Rec'd #: 123 for line 052) are two different numbers.
Tips -
system DN length. However, network or central office
constraints may require you to set it to some other value.
Changing the Received number length causes all programmed
received digits to be cleared.

DN length

This feature allows you to change the number of digits for all
DNs. The maximum length is seven. The default, and
minimum length, is 3.
1. Press CHANGE to select the setting: 3, 4, 5, 6, or 7.
2. Press ' to save the new DN length.
The display shows Drop data calls?.
3. Press YES to save the new DN length.
NO restores the original value.
N0130943 02
The target line number (for example, line 052) and
The Received number length may be the same as the
System prgrming / 465
Installer password required
Installer password required
Modular ICS 7.1 Installer Guide