Nortel ICS Install Manual page 464

464 / System prgrming
Remote access packages defaults
Parameter
Package 00
Package 01
Line pool access
Packages 02 - 15
Line pool access
Tips -
from one remote package to another.
The line pool access display shows an alphabetic line pool
identifier, followed by a numeric line pool access code in
brackets, for example, PoolA (9):N. If no access code has
been identified, there is nothing between the brackets.
For example PoolA ( ):N.
The line pool access code can be programmed under
Terminals&Sets.
Remote package 00 is the default setting and cannot be
changed.
You can define up to 15 remote access packages (01 to 15).
Modular ICS 7.1 Installer Guide
Square PBX
Prohibits remote access to line pools, Page, remote
monitoring and administration. Cannot be changed.
Y for Pool A
N for Pools B to O and PRI-A and PRI-B (as well as
PRI-C and PRI-D on systems using Profile 1 or 4).
N for Pools A to O and PRI-A and PRI-B (as well as
PRI-C and PRI-D on systems using Profile 1 or 4).
You can use COPY and the dialpad to copy settings
Hybrid Centrex DID
N0130943 02