Terminals&Sets; Line Access - Nortel ICS Install Manual

Terminals&Sets
Terminals&Sets allows you to assign settings to each
telephone.
This is the first heading that appears after you enter your
password.
1. Press ≠.
The prompt displays: Show set:
2. Enter the set number of the telephone you would like to
program.
3. Press COPY to duplicate the programming for the telephone
and apply it to another telephone, a range of telephones or
all the telephones on the system.
For more information about copying set programming,
refer to Copying telephone programming on page 316.

Line access

Line access allows you to assign lines to individual
telephones. When you are finished programming Line access
settings for one telephone, you can copy those settings to other
telephones.
PRI lines can only be configured as direct inward dialing
(DID) lines. Therefore, PRI lines are always Auto Answer and
cannot be Manual Answer.
N0130943 02
Terminals&Sets / 335
Modular ICS 7.1 Installer Guide