CLID match
This setting determines the minimum number of digits that an
external call must match to an existing system speed dial
number in order for the system to offer a name display for the
CLID prompt, if the system speed dial number is set up to
display the caller name.
1. Under Featr settings, press ≠.
The display shows Backgrnd music:.
2. Press ' until the display shows CLID match: 8.
3. Press CHANGE to select the a number from 3 to 8, or select
None, if you do not require any number matching.
4. Press ® to exit or ' to continue programming.
Silent Monitor
You can monitor Hunt group members using a two-line
display telephone that has been designated as a supervisor
telephone.
You create the Silent Monitor feature capability by:
•
determining how many system telephones will be allowed
to be supervisors. (Refer to SM sets on page 481.)
•
determining which telephones will be allowed to be
supervisors. (Refer to the SM Supervisor field under
Capabilities on page 345).
•
determining the password that the supervisor enters after
the feature code ≤•fifi‚ is entered to start
monitoring Hunt group telephones. (Refer to Silent
Monitor password on page 418.)
N0130943 02
System prgrming / 447
Modular ICS 7.1 Installer Guide