Prime Set; Auto Privacy - Nortel ICS Install Manual

368 / Lines

Prime set

This feature allows you to assign a telephone to provide
backup answering for calls on the line. Unanswered calls are
redirected to the prime telephone.
Use CHANGE and the dialpad to enter the internal number of the
prime telephone.
The default prime set for each line on a system with three-digit
DNs is 221.
Tips -
telephone for a trunk, and only when overflow call routing is
active.
Each line can be assigned only one prime telephone.

Auto privacy

This feature controls whether one Norstar user can select a line
in use at another telephone to join an existing call. The default
setting is Privacy on, so that nobody with a Norstar telephone
can press a line appearance on their telephone to join a call in
progress at another telephone.
Press CHANGE to select either: Y (on) or N (off).
Tips -
individual call using the Privacy feature (≤°‹).
Note: This feature does not work on target lines or PRI lines.
Modular ICS 7.1 Installer Guide
For auto-answer trunks, calls ring only at the prime
Users can change a line privacy setting for an
N0130943 02