Name; User Prefernces - Nortel ICS Install Manual

348 / Terminals&Sets

Name

The default name for a telephone is the DN, but it can be
changed to any combination of letters and numbers to a
maximum length of seven characters.
For more information, refer to the Modular ICS 7.1 System
Coordinator Guide.

User prefernces

Any programming a user can do at a set can also be done
through User prefernces. In the following table, the default
settings are given in bold.
Setting
Mdl
Button prgrming
User speed dial
Call log opt'ns
Dialing opt'ns
Language
Display cntrst
Ring type
Modular ICS 7.1 Installer Guide
Allows you to pre-program the model of telephone which
will use this DN.
Allows you to program the buttons with internal and
external autodialers and/or programmed feature keys.
Allows you to program user speed dialers
(No defaults). (speed dial codes 256 to 279)
Allows you to select how the telephone will log calls:
Log all calls, No autologging, No one answered, or
Unanswered by me.
Allows you to select how the system will dial for this
telephone: Standard dial, Pre-dial or Automatic dial.
Allows you to choose the language that will display on the
set. The choices are based on the Profile chosen when
the system was set up.
Profile 1, 3 and 4: English, French or Spanish.
Profile 2: English, French, Spanish or Turkish
Allows you to adjust the contrast of the display
1, 2, 3, 4, 5.....9
Allows you to select a ring type 1, 2, 3, 4
Description
N0130943 02