Nortel ICS Install Manual page 550

Nortel norstar ics software: install guide
Hide thumbs Also See for ICS:
Table of Contents

Advertisement

550 / Alarm codes
Example
display
Alarm:
51 X
Alarm:
52 X Y
Alarm:
61 X Y
Alarm:
62 X Y
Alarm:
63 Z
Alarm:
68-Z
Alarm:
76 X
X = DS-30 port numbers, Y = Trunk Cartridge number (numbered from left to
right), and Z = Trunk port number
Modular ICS 7.1 Installer Guide
Meaning
Trunk Module
disconnected.
TC disconnected from TM
Incompatible Trunk
Cartridge
Unsupported Auto-answer
setting (Loop Start TCs)
No available DTMF
receivers
A device has been
connected to a port which
is not available for the
device type.
Data Module
disconnected.
Possible causes
All Trunk Cartridges are
disconnected from the TM on
DS-30 port X.
The TM was powered down.
The fiber cable from the TM to
the ICS is disconnected.
Trunk Cartridge Y on DS-30
port X is disconnected from
the TM.
Trunk Cartridge Y on DS-30
port X cannot operate with the
Trunk type assigned to it in
Configuration.
Trunk Cartridge X on DS-30
port Y does not support the
auto-answer setting.
DTMF receivers are busy, not
working properly, or have not
been installed.
Power down the system and
disconnect the device from
the port identified. Reconnect
it to a valid port.
The Data Module is
disconnected from the DM on
DS-30 port X.
The DM was powered down.
The fiber cable from the DM to
the ICS is disconnected.
N0130943 02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Modular ics 7.1

Table of Contents