Installation Method; Installing The Face Plate Auto-Builder For Ns - Omron SYSMAC WS02-NSFC1-E Setup Manual

Installation Method

2-1 Installation Method
2-1-1

Installing the Face Plate Auto-Builder for NS

6
The release notes will be displayed automatically after inserting the installation
CD in the CD-ROM drive. Install the software after reading the release notes
thoroughly.
Step 1: Execute the following setup wizard program from the CD.
<CD-ROM drive> \Face Plate Auto-Builder for NS\DISK1\SETUP.EXE.
Step 2: Start installation of the Face Plate Auto-Builder for NS by clicking the
Next Button.
Step 3: Specify the drive and directory in which the program files will be
installed.
The default setting is C: \Program Files\OMRON\FP Auto-Builder. To
change the directory, click the Browse Button, and select the directory.
Section 2-1