System Requirements; Hardware; Equipment Required To Transfer Screen Data - Omron NS Manual

Section 1 Overview
NS-Designer Operation Manual

1-2 System Requirements

The following are required to use the NS-Designer.
1-2-1

Hardware

Recommended Processor
Intel Celeron 400 MHz or better required.
Computer
IBM PC/AT or compatible capable of running the required OS.
Recommended Memory
64 Mbytes or more required. (Be sure to provide sufficient capacity, observing the recommend values
for the OS.)
Available Disk Space
200 Mbytes or more recommended.
CD-ROM Drive
Required to install the NS-Designer.
Monitor
VGA monitor required for DOS computers. A resolution of 800 x 600 pixels or higher is recommended.
If the display resolution in the Windows screen properties is set to a lower setting, such as 640 x 480
pixels, portions of the NS-Designer windows may not be displayed. If this happens, increase the reso-
lution. If large display fonts are used, not all of the text may fit in dialog boxes, preventing correct dis-
play. If this happens, use the small display fonts.
Mouse
A mouse supported by the OS must be used.
Operating System
Any of the following operating systems can be used: Microsoft Windows 95, Microsoft Windows 98,
Microsoft Windows Me, or Microsoft Windows NT (version 4.0, service pack 6a or higher), Microsoft
Windows 2000 (service pack 3 or higher), or Microsoft XP.
Microsoft Windows 3.1 is not supported.
Internet Explorer version 5.5 or higher is required.
1-2-2

Equipment Required to Transfer Screen Data

RS-232C connection cable
Ethernet cable
Memory Cards
Refer to Appendix 7 Connecting Cable Specifications for cable specifications.
1-3
1-2 System Requirements