Edit Of Symbol Comment - Omron CX-PROGRAMMER - INTRODUCTION GUIDE Introduction Manual

Installation
Installation
to Startup
to Startup
Click
Ladder Window is
switched to the Symbol
Comment Editing
window.
Double-click the left
mouse button on a bit
number that you want to
enter a symbol comment,
and you will able to enter
a symbol comment.
Drag the mouse with the
right mouse button
pressed to invert the
source bits of copy in
blue.
Click the right
mouse button on
the range, and
select [Copy] from
the popup menu.
Copy&Paste of symbol
Copy&Paste of symbol
comments is possible between
comments is possible between
Excel and CX-Programmer too.
Excel and CX-Programmer too.
Opening a
Opening a
new project
new project

5-3. Edit of Symbol Comment

Copy&Paste and deletion of one or more comments are possible by the cell.
Copy&Paste and deletion of one or more comments are possible by the cell.
Example of copying & pasting comments of two bits
Device type
Device type
settings
settings
Click the right mouse button
on the bit number of the copy
destination, and select [Paste].
The comments of the selected
two bits are copied.
Creating a
Creating a
program
program