Image - EverFocus EZN Series User Manual

5.2.2

Image

You can configure the image settings on this page.
Day/Night Mode: Select a Day/Night mode for the camera to display the color or B/W images.
• Auto: Select Auto for the camera to automatically switch to day or night mode. You can further set up a
Delay Switch time (second) in the below field.
• Color Mode: Select Color Mode for the camera to display color images.
• Black White Mode: Select Black White Mode for the camera to display B/W images.
• Schedule (B/W): Select Schedule (B/W) for the camera to display B/W images during the setup time range.
Please select the Start Time and End Time in the below field.
Delay Switch (s): This function can only be activated if you select Auto for the Day/Night Mode. Set up a delay
switch time (seconds) for the camera to auto switch between day and night modes.
IR-LED: Select On to turn on IR LEDs; select Off to turn off IR-LED; select Auto for the camera to automatically
turn on / off the IR-LED based on the light sensor on the IP camera.
Flip: Switch the button to the right to enable the Flip function. The image will be rotated vertically around a
horizontal axis.
Mirror: Switch the button to the right to enable the Mirror function. The image will be rotated horizontally
around a vertical axis.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
20