Image Setting - EverFocus EPN5230 User Manual

5.4.1 Image Setting

On the Live View Window, click Image Setting to expand the image setting field. You can adjust image
parameters including brightness, hue, contrast, saturation and sharpness in this field. To restore the
parameters to default value, click the Default button. To collapse the Image Setting field, click Image
Setting again.
To further configure the image parameters, click Advanced Setting to expand the Advanced Setting field.
Click Advance Setting again can collapse the setting field.
Brightness
Hue
Contrast
Saturation
Sharpness
Click to return the above value to factory default
Click to expand the Advanced Setting field
Flip Image: Click the
vertically.
BLC: Check/uncheck the box to enable/disable the Backlight Compensation
function.
Low Lux: Check/uncheck the box to enable/disable the low lux function.
WDR: Check/uncheck the box to enable/disable the Wide Dynamic Range
function.
3D DNR: Check/uncheck the box to enable/disable the 3D Digital Noise
Reduction function.
Day Night Mode: Click
switch the camera to night mode. Click
between day and night modes automatically. If Auto is selected, you can
configure the sensitivity ranging from 0-255 in the To Mono and To Color
field. So the camera will automatically switch between day mode and night
mode based on the setup sensitivity.
Under Night or Auto Day Night mode, the camera will automatically switch
the IR LEDs from the near-distance lights to the far-distance lights based on
the zoom ratio. Please refer to
buttons to flip the image horizontally or
to switch the camera to day mode. Click
for the camera to switch
2. Physical Description
22
EPN5230 / EPN5210
to
for more details.