Table of Contents
Advertisement
7.4
Video
The settings relating to video such as streaming, camera OSD can be configured on this page. The
"Video" page has five tabs: Multi-streaming, Camera, Advanced, ROI and Privacy Mask.
7.4.1
Multi Streaming
【Stream Settings】This IP camera can output two video streams simultaneously. For each of these
streams, the user can set the compression format, resolution, bit rate, and frame rate individually.
Note: If you connect to the camera via the Internet and experience a delay (lag time) in the video
feed, try to reduce the number of streams and the quality and resolution of the streams – but
keep the frame rate at its maximum.
Enable: This option is only for enabling the stream for live view (see Video Stream in 5. Live View
Window). Stream 1 is always enabled for live view. To enable Stream 2 and/or Stream 3 for Live
View, check the "Enable" box.
Format: Select the encoding format – H.264 or MJPEG.
Resolution: Select the most suitable resolution for your needs.
Frame Rate: Select from 1 to 30 fps.
Bit Rate: If required, select whether you want the stream to stream a Constant Bit Rate or a
Variable Bit Rate, and set the values of whichever option you choose.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
55
EPN4220d/4220di
Advertisement
Table of Contents
