7.3.5 SNMP
The default values for SNMP v1/v2/v2c and SNMP v3 are already filled in. Click either of the Enable
buttons to enable either of the two. Make your changes as desired. Click on the Trap Address field
to enter the digits, if required.
7.3.6 Network Alarm
This function works with EverFocus's CMS software, e.g. the Power Video Plus. For the setting
details, please refer to the CMS network alarm protocol.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
41
EHN Series