FTP Port: Enter the port number for FTP server. Default is 21.
Recording Path: Assign the recording path.
User Name: Set FTP User name.
Password: Set FTP password.
PASV mode: Check to enable Passive mode (most sites normally require Passive
mode). If unable to establish a connection, uncheck "PASV" mode.
Test FTP Server: Press
FTP server.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
5.3.4 SNMP
This page allows the user to set IP Camera SNMP settings so it can be used
by a NMS (Network Management System).
button to send a test file to the designated
23
EHN3200