Network - EverFocus EQN22 Series User Manual

Note:
1. A maximum five languages can be in the language list.
2. Uploading a new language file will reboot the system
automatically. Please reconnect to the IP camera after reboot.
Press Apply to apply the setting changes or Reset to reset without saving the
change.

4.3 Network

The network settings and the settings relating to DDNS, Bandwidth, SMTP/FTP
and Network Alarm can be configured on this page.
The "Network setup" page has 5 tabs: [Network] tab, the [DDNS] tab, the
[Bandwidth] tab, the [SMTP/FTP] tab and the [Network alarm] tab.
4.3.1 Network
The following information is required to configure the network settings. Contact
the network administrator or your Internet service provider.
16
EQN2200