Connecting The Camera To The Network - EverFocus 288 Series User Manual

Value IP 288 / 368 / 468 Series

5.3. Connecting the Camera to the Network

There are three methods to connect the IP camera to the network: Router or LAN Connection, Direct
High-Speed Connection and One-to-One Connection.
Router or LAN connection
This is the most common connection in which the IP camera is connected to a router and allows multiple
users on and off site to see the IP camera on a LAN / WAN (Internet). The camera must be assigned an IP
address that is compatible with its LAN. By setting up port forwarding on the router, you can remotely
access the cameras from outside of the LAN via the Internet. To remotely access the Web interface of
the IP camera, please refer to 7.1.1 Network (DDNS Settings). To set up port forwarding, please refer
to Appendix D. Setting up Port Forwarding Function.
Cat 5 Straight Through Cable
Internet
High-speed modem
Straight-through LAN patch cable
Router
Left: Pinout of a straight-through cable.
28