Alarm Input - EverFocus 288 Series User Manual

Snapshot: Check the box to enable taking snapshots to the micro SD Card when an event
occurs. You can further configure the Snapshot settings including Snapshot Interval and
Snapshot No.. For example, if you set up the Snapshot Interval to 5 and Snapshot No. to 3,
system will take 3 snapshots every 5 seconds.
Record: Check the box to enable recording to the micro SD Card when an event occurs.
Alarm Output: Check the box to enable triggering the external alarm device.
After complete the settings, click Save to apply the settings.
Note: The Snapshot and Record settings are only functional if the micro SD Card has been
inserted in the camera's micro SD card slot.

7.3.1.3. Alarm Input

Use this page to configure the alarm input channel in which event will be triggered and set up
schedules to active alarm functions. When an event is triggered by the alarm input, the alarm
icon at the top of the Live View window will turn red and blink
63
Value IP 288 / 368 / 468 Series
to alert the user.