7.3.1.2. Tamper Detection Settings
Enable Tamper Detection: Click the button to enable the tamper detection function.
Enable OSD Alarm: Click the button to enable triggering the OSD alarm.
Tamper + Motion Detection: Click the button if you want the event reaction to be triggered only
when both motion and tamper are detected.
After complete the settings, click Save to apply the settings.
7.3.1.3. Alarm Input
To set up the alarm input function:
1.
Check the Enable box to enable the motion detection function.
2.
Select Normal Open or Normal Close as the alarm input type.
3.
Set up schedules to active alarm input function and send alarm notification. Check the box of
64
EAN7360 / EHN7360 / EZN7360