Table of Contents
Advertisement
Step 3: Cutting
Send the cut data to the machine, and cut the material.
IMPORTANT
If the material comes off or the machine operates abnormally, press [PAUSE] to cancel the output.
Lower the loading lever, take out the material, and perform the setup again from the beginning.
WARNING
Never touch the cutting carriage while output is in progress.
The cutting carriage moves at high speed. Coming into contact with the moving carriage may cause injury.
Procedure
1.
Click
.
The [Cut ]window is displayed.
2.
Click [OK].
Cutting starts.
RELATED LINKS
・
P. 171Pausing and Canceling Output
・
P. 26Setting Up Material
Cutting Method
Creating Cut Data Using CutStudio
59
Advertisement
Table of Contents
